The cheap all-terrain wheelchair
-
0:01 - 0:04Living with a physical disability isn't easy
-
0:04 - 0:06anywhere in the world,
-
0:06 - 0:09but if you live in a country like the United States,
-
0:09 - 0:12there's certain appurtenances available to you that do make life easier.
-
0:12 - 0:15So if you're in a building, you can take an elevator.
-
0:15 - 0:17If you're crossing the street, you have sidewalk cutouts.
-
0:17 - 0:19And if you have to travel some distance farther
-
0:19 - 0:22than you can do under your own power, there's accessible vehicles,
-
0:22 - 0:24and if you can't afford one of those,
-
0:24 - 0:27there's accessible public transportation.
-
0:27 - 0:29But in the developing world, things are quite different.
-
0:29 - 0:33There's 40 million people who need a wheelchair but don't have one,
-
0:33 - 0:36and the majority of these people live in rural areas,
-
0:36 - 0:40where the only connections to community, to employment, to education,
-
0:40 - 0:42are by traveling long distances on rough terrain
-
0:42 - 0:45often under their own power.
-
0:45 - 0:47And the devices usually available to these people
-
0:47 - 0:50are not made for that context, break down quickly,
-
0:50 - 0:52and are hard to repair.
-
0:52 - 0:57I started looking at wheelchairs in developing countries in 2005,
-
0:57 - 1:01when I spent the summer assessing the state of technology in Tanzania,
-
1:01 - 1:05and I talked to wheelchair users, wheelchair manufacturers, disability groups,
-
1:05 - 1:06and what stood out to me
-
1:06 - 1:09is that there wasn't a device available
-
1:09 - 1:11that was designed for rural areas, that could go fast
-
1:11 - 1:14and efficiently on many types of terrain.
-
1:14 - 1:16So being a mechanical engineer,
-
1:16 - 1:18being at MIT and having lots of resources available to me,
-
1:18 - 1:21I thought I'd try to do something about it.
-
1:21 - 1:24Now when you're talking about trying to travel
-
1:24 - 1:26long distances on rough terrain,
-
1:26 - 1:28I immediately thought of a mountain bike,
-
1:28 - 1:29and a mountain bike's good at doing this
-
1:29 - 1:31because it has a gear train,
-
1:31 - 1:34and you can shift to a low gear if you have to climb a hill
-
1:34 - 1:35or go through mud or sand
-
1:35 - 1:38and you get a lot of torque but a low speed.
-
1:38 - 1:40And if you want to go faster, say on pavement,
-
1:40 - 1:41you can shift to a high gear,
-
1:41 - 1:43and you get less torque, but higher speeds.
-
1:43 - 1:45So the logical evolution here
-
1:45 - 1:48is to just make a wheelchair with mountain bike components,
-
1:48 - 1:49which many people have done.
-
1:49 - 1:52But these are two products available in the U.S. that
-
1:52 - 1:55would be difficult to transfer into developing countries
-
1:55 - 1:57because they're much, much too expensive.
-
1:57 - 2:00And the context I'm talking about is where
-
2:00 - 2:04you need to have a product that is less than 200 dollars.
-
2:04 - 2:06And this ideal product would also be able to go
-
2:06 - 2:10about five kilometers a day so you could get to your job, get to school,
-
2:10 - 2:12and do it on many, many different types of terrain.
-
2:12 - 2:15But when you get home or want to go indoors at your work,
-
2:15 - 2:19it's got to be small enough and maneuverable enough to use inside.
-
2:19 - 2:23And furthermore, if you want it to last a long time out in rural areas,
-
2:23 - 2:27it has to be repairable using the local tools, materials and knowledge
-
2:27 - 2:30in those contexts.
-
2:30 - 2:32So the real crux of the problem here is,
-
2:32 - 2:36how do you make a system that's a simple device
-
2:36 - 2:38but gives you a large mechanical advantage?
-
2:38 - 2:40How do you make a mountain bike for your arms
-
2:40 - 2:43that doesn't have the mountain bike cost and complexity?
-
2:43 - 2:45So as is the case with simple solutions,
-
2:45 - 2:49oftentimes the answer is right in front of your face, and for us it was levers.
-
2:49 - 2:53We use levers all the time, in tools, doorknobs, bicycle parts.
-
2:53 - 2:56And that moment of inspiration, that key invention moment,
-
2:56 - 2:59was when I was sitting in front of my design notebook
-
2:59 - 3:02and I started thinking about somebody grabbing a lever,
-
3:02 - 3:04and if they grab near the end of the lever,
-
3:04 - 3:05they can get an effectively long lever
-
3:05 - 3:08and produce a lot of torque as they push back and forth,
-
3:08 - 3:11and effectively get a low gear.
-
3:11 - 3:13And as they slide their hand down the lever,
-
3:13 - 3:16they can push with a smaller effective lever length,
-
3:16 - 3:18but push through a bigger angle every stroke,
-
3:18 - 3:22which makes a faster rotational speed, and gives you an effective high gear.
-
3:22 - 3:23So what's exciting about this system
-
3:23 - 3:26is that it's really, really mechanically simple,
-
3:26 - 3:27and you could make it using technology
-
3:27 - 3:30that's been around for hundreds of years.
-
3:30 - 3:32So seeing this in practice,
-
3:32 - 3:33this is the Leveraged Freedom Chair that,
-
3:33 - 3:36after a few years of development,
-
3:36 - 3:38we're now going into production with,
-
3:38 - 3:39and this is a full-time wheelchair user --
-
3:39 - 3:41he's paralyzed -- in Guatemala,
-
3:41 - 3:45and you see he's able to traverse pretty rough terrain.
-
3:45 - 3:50Again, the key innovation of this technology is that when he wants to go fast,
-
3:50 - 3:54he just grabs the levers near the pivots and goes through a big angle every stroke,
-
3:54 - 3:57and as the going gets tougher, he just slides his hands up the levers,
-
3:57 - 3:59creates more torque, and kind of bench-presses his way
-
3:59 - 4:01out of trouble through the rough terrain.
-
4:01 - 4:04Now the big, important point here is that
-
4:04 - 4:07the person is the complex machine in this system.
-
4:07 - 4:10It's the person that's sliding his hands up and down the levers,
-
4:10 - 4:13so the mechanism itself can be very simple
-
4:13 - 4:16and composed of bicycle parts you can get anywhere in the world.
-
4:16 - 4:18Because those bicycle parts
-
4:18 - 4:20are so ubiquitously available, they're super-cheap.
-
4:20 - 4:23They're made by the gazillions in China and India,
-
4:23 - 4:24and we can source them anywhere in the world,
-
4:24 - 4:27build the chair anywhere, and most importantly repair it,
-
4:27 - 4:29even out in a village with a local bicycle mechanic
-
4:29 - 4:34who has local tools, knowledge and parts available.
-
4:34 - 4:37Now, when you want to use the LFC indoors,
-
4:37 - 4:40all you have to do is pull the levers out of the drivetrain,
-
4:40 - 4:43stow them in the frame, and it converts into a normal wheelchair
-
4:43 - 4:46that you can use just like any other normal wheelchair,
-
4:46 - 4:48and we sized it like a normal wheelchair,
-
4:48 - 4:52so it's narrow enough to fit through a standard doorway,
-
4:52 - 4:56it's low enough to fit under a table,
-
4:56 - 5:00and it's small and maneuverable enough to fit in a bathroom
-
5:00 - 5:02and this is important so the user can get up close to a toilet,
-
5:02 - 5:04and be able to transfer off
-
5:04 - 5:10just like he could in a normal wheelchair.
-
5:10 - 5:13Now, there's three important points that I want to stress
-
5:13 - 5:17that I think really hit home in this project.
-
5:17 - 5:20The first is that this product works well because
-
5:20 - 5:22we were effectively able to combine
-
5:22 - 5:27rigorous engineering science and analysis with user-centered design
-
5:27 - 5:30focused on the social and usage and economic factors
-
5:30 - 5:32important to wheelchair users in the developing countries.
-
5:32 - 5:35So I'm an academic at MIT, and I'm a mechanical engineer,
-
5:35 - 5:38so I can do things like look at the type of terrain you want to travel on,
-
5:38 - 5:41and figure out how much resistance it should impose,
-
5:41 - 5:44look at the parts we have available and mix and match them
-
5:44 - 5:47to figure out what sort of gear trains we can use,
-
5:47 - 5:50and then look at the power and force you can get out of your upper body
-
5:50 - 5:52to analyze how fast you should be able to go in this chair
-
5:52 - 5:54as you put your arms up and down the levers.
-
5:54 - 5:58So as a wet-behind-the-ears student, excited,
-
5:58 - 6:00our team made a prototype,
-
6:00 - 6:05brought that prototype to Tanzania, Kenya and Vietnam in 2008,
-
6:05 - 6:07and found it was terrible
-
6:07 - 6:10because we didn't get enough input from users.
-
6:10 - 6:13So because we tested it with wheelchair users,
-
6:13 - 6:15with wheelchair manufacturers, we got that feedback from them,
-
6:15 - 6:19not just articulating their problems, but articulating their solutions,
-
6:19 - 6:22and worked together to go back to the drawing board and make a new design,
-
6:22 - 6:24which we brought back to East Africa in '09
-
6:24 - 6:27that worked a lot better than a normal wheelchair on rough terrain,
-
6:27 - 6:30but it still didn't work well indoors because it was too big,
-
6:30 - 6:32it was heavy, it was hard to move around,
-
6:32 - 6:36so again with that user feedback, we went back to the drawing board,
-
6:36 - 6:38came up with a better design, 20 pounds lighter,
-
6:38 - 6:41as narrow as a regular wheelchair, tested that in a field trial in Guatemala,
-
6:41 - 6:43and that advanced the product to the point
-
6:43 - 6:47where we have now that it's going into production.
-
6:47 - 6:49Now also being engineering scientists,
-
6:49 - 6:53we were able to quantify the performance benefits of the Leveraged Freedom Chair,
-
6:53 - 6:56so here are some shots of our trial in Guatemala
-
6:56 - 6:59where we tested the LFC on village terrain,
-
6:59 - 7:01and tested people's biomechanical outputs,
-
7:01 - 7:03their oxygen consumption, how fast they go,
-
7:03 - 7:05how much power they're putting out,
-
7:05 - 7:08both in their regular wheelchairs and using the LFC,
-
7:08 - 7:10and we found that the LFC is about 80 percent faster
-
7:10 - 7:12going on these terrains than a normal wheelchair.
-
7:12 - 7:16It's also about 40 percent more efficient than a regular wheelchair,
-
7:16 - 7:19and because of the mechanical advantage you get from the levers,
-
7:19 - 7:21you can produce 50 percent higher torque
-
7:21 - 7:25and really muscle your way through the really, really rough terrain.
-
7:25 - 7:28Now the second lesson that we learned in this is that
-
7:28 - 7:31the constraints on this design really push the innovation,
-
7:31 - 7:33because we had to hit such a low price point,
-
7:33 - 7:35because we had to make a device that could travel
-
7:35 - 7:38on many, many types of terrain but still be usable indoors,
-
7:38 - 7:41and be simple enough to repair,
-
7:41 - 7:43we ended up with a fundamentally new product,
-
7:43 - 7:45a new product that is an innovation
-
7:45 - 7:48in a space that really hasn't changed in a hundred years.
-
7:48 - 7:52And these are all merits that are not just good in the developing world.
-
7:52 - 7:54Why not in countries like the U.S. too?
-
7:54 - 7:56So we teamed up with Continuum,
-
7:56 - 7:57a local product design firm here in Boston
-
7:57 - 8:01to make the high-end version, the developed world version,
-
8:01 - 8:03that we'll probably sell primarily in the U.S. and Europe,
-
8:03 - 8:06but to higher-income buyers.
-
8:06 - 8:09And the final point I want to make is that I think
-
8:09 - 8:12this project worked well because we engaged
-
8:12 - 8:17all the stakeholders that buy into this project and are important to consider
-
8:17 - 8:20in bringing the technology from inception of an idea
-
8:20 - 8:24through innovation, validation, commercialization and dissemination,
-
8:24 - 8:28and that cycle has to start and end with end users.
-
8:28 - 8:31These are the people that define the requirements of the technology,
-
8:31 - 8:33and these are the people that have to give the thumbs-up at the end,
-
8:33 - 8:36and say, "Yeah, it actually works. It meets our needs."
-
8:36 - 8:38So people like me in the academic space,
-
8:38 - 8:41we can do things like innovate and analyze and test,
-
8:41 - 8:44create data and make bench-level prototypes,
-
8:44 - 8:47but how do you get that bench-level prototype to commercialization?
-
8:47 - 8:51So we need gap-fillers like Continuum that can work on commercializing,
-
8:51 - 8:53and we started a whole NGO to bring our chair to market --
-
8:53 - 8:56Global Research Innovation Technology --
-
8:56 - 9:00and then we also teamed up with a big manufacturer in India, Pinnacle Industries,
-
9:00 - 9:02that's tooled up now to make 500 chairs a month
-
9:02 - 9:04and will make the first batch of 200 next month,
-
9:04 - 9:06which will be delivered in India.
-
9:06 - 9:08And then finally, to get this out to the people in scale,
-
9:08 - 9:11we teamed up with the largest disability organization
-
9:11 - 9:13in the world, Jaipur Foot.
-
9:13 - 9:15Now what's powerful about this model
-
9:15 - 9:18is when you bring together all these stakeholders
-
9:18 - 9:20that represent each link in the chain
-
9:20 - 9:23from inception of an idea
-
9:23 - 9:25all the way to implementation in the field,
-
9:25 - 9:27that's where the magic happens.
-
9:27 - 9:29That's where you can take a guy like me, an academic,
-
9:29 - 9:33but analyze and test and create a new technology
-
9:33 - 9:36and quantitatively determine how much better the performance is.
-
9:36 - 9:39You can connect with stakeholders like the manufacturers
-
9:39 - 9:40and talk with them face-to-face and leverage their
-
9:40 - 9:44local knowledge of manufacturing practices and their clients
-
9:44 - 9:47and combine that knowledge with our engineering knowledge
-
9:47 - 9:50to create something greater than either of us could have done alone.
-
9:50 - 9:53And then you can also engage the end user
-
9:53 - 9:55in the design process, and not just ask him what he needs,
-
9:55 - 9:58but ask him how he thinks it can be achieved.
-
9:58 - 10:01And this picture was taken in India in our last field trial,
-
10:01 - 10:04where we had a 90-percent adoption rate where people
-
10:04 - 10:07switched to using our Leveraged Freedom Chair over their normal wheelchair,
-
10:07 - 10:10and this picture specifically is of Ashok,
-
10:10 - 10:13and Ashok had a spinal injury when he fell out of a tree,
-
10:13 - 10:16and he had been working at a tailor, but once he was injured
-
10:16 - 10:19he wasn't able to transport himself from his house
-
10:19 - 10:22over a kilometer to his shop in his normal wheelchair.
-
10:22 - 10:23The road was too rough.
-
10:23 - 10:26But the day after he got an LFC, he hopped in it,
-
10:26 - 10:28rode that kilometer, opened up his shop
-
10:28 - 10:31and soon after landed a contract to make school uniforms
-
10:31 - 10:34and started making money, started providing for his family again.
-
10:34 - 10:36Ashok: You also encouraged me to work.
-
10:36 - 10:39I rested for a day at home.
-
10:39 - 10:43The next day I went to my shop.
-
10:43 - 10:46Now everything is back to normal.
-
10:46 - 10:50Amos Winter: And thank you very much for having me today.
-
10:50 -(Applause)
- Title:
- The cheap all-terrain wheelchair
- Speaker:
- Amos Winter
- Description:
-
How do you build a wheelchair ready to blaze through mud and sand, all for under $200? MIT engineer Amos Winter guides us through the mechanics of an all-terrain wheelchair that’s cheap and easy to build -- for true accessibility -- and gives us some lessons he learned along the road.
- Video Language:
- English
- Team:
- closed TED
- Project:
- TEDTalks
- Duration:
- 11:14
Jenny Zurawell edited English subtitles for The cheap all-terrain wheelchair | ||
Krystian Aparta edited English subtitles for The cheap all-terrain wheelchair | ||
Thu-Huong Ha edited English subtitles for The cheap all-terrain wheelchair | ||
Thu-Huong Ha edited English subtitles for The cheap all-terrain wheelchair | ||
Thu-Huong Ha approved English subtitles for The cheap all-terrain wheelchair | ||
Thu-Huong Ha edited English subtitles for The cheap all-terrain wheelchair | ||
Thu-Huong Ha edited English subtitles for The cheap all-terrain wheelchair | ||
Morton Bast accepted English subtitles for The cheap all-terrain wheelchair |