WEBVTT

00:00:00.161 --> 00:00:06.149
Here we see the inclusion--importing an OPML file in Bloglines.

00:00:06.149 --> 00:00:14.434
Then, we go to Bloglines: www.bloglines.com and login.

00:00:14.434 --> 00:00:18.801
But, I had already posted my credentials, I was already logged in, and so I'm in.

00:00:18.801 --> 00:00:26.316
I drained to do the example, and I assume that you have already available the OPML file, downloaded to your computer.

00:00:27.254 --> 00:00:28.784
I add content.

00:00:29.398 --> 00:00:31.415
So, here, two words:

00:00:31.995 --> 00:00:37.784
to add a feed, says: "Add a feed"

00:00:38.445 --> 00:00:44.351
and we have seen in another video that this--the feed address is one thing,

00:00:44.351 --> 00:00:49.264
the URL address of the blog, is another.

00:00:49.264 --> 00:00:54.100
If you put the feed address, he adds it directly.

00:00:54.100 --> 00:01:00.100
If you put only the address of the blog, blog URL,

00:01:00.100 --> 00:01:07.943
then he will look for if there are--to see if there are addresses of feeds inside, and propose them.

00:01:08.389 --> 00:01:12.350
But enter an OPML file is a different thing.

00:01:12.350 --> 00:01:19.791
At the beginning, some had confused the matter and had put here the address of the OPML file

00:01:19.791 --> 00:01:25.865
where I am available in DropBox, here, with a link in my blog.

00:01:25.865 --> 00:01:31.930
No: the OPML is imported, not posted anything here.

00:01:31.930 --> 00:01:33.167
Matter.

00:01:33.583 --> 00:01:34.752
Browse.

00:01:34.789 --> 00:01:38.979
I had put on the Desktop--Yes, here it is: this--

00:01:38.979 --> 00:01:41.063
and imports. Ok.

00:01:41.063 --> 00:01:45.634
He says he has 343 imported feeds. Fine.

00:01:45.634 --> 00:01:51.026
Of course, here is a bit of patience because it takes a while to load.

00:01:51.026 --> 00:01:53.697
One can also get to do another thing.

00:01:53.697 --> 00:01:55.689
Here's that are coming.

00:01:55.689 --> 00:01:57.458
Good: everything here.